HPE Community
Insight Remote Support
1825754 Members
2339 Online
109687 Solutions
New Discussion

Who Me Too'd this topic

MarioE
Trusted Contributor

‎09-23-2023 12:43 AM - last edited on ‎09-26-2023 04:40 AM by

‎09-23-2023 12:43 AM - last edited on ‎09-26-2023 04:40 AM by

snmp V1/V3 FAILURE from SAN Switch with v9.1.1c

I monitor our SAN switch via the IRS. So far always with snmpv1, which has always worked perfectly.
Now I have made a firmware update of the SAN Switch from v9.0.1d to v9.1.1c.
Since then I have a connection error in the IRS of every SAN switch:

IRS_Switch.jpg

When I look at the monitoring status description of the switch, I have a status SUCCESS via snmpv1:

snmpv1_SUCCESS.jpg

but a FAILURE over V2C?:

snmpv1_FAILURE.jpg

The SAN switch can only do snmpv1 or snmpv3.
I have also disabled snmpv1 on the SAN Switch and enabled and configured snmpv3, then I get this entries:

snmpv3_SUCCESS.jpg

Protocol is snmpv3, but Description and Detailed is snmpv1?
And the Failure:

snmpv3_FAILURE.jpg

SNMP traps arrive from the SAN switch in the IRS and cases are also opened.
Does anyone have the same problem ? How can I correct the errors?

2 people had this problem.
0 Kudos
Reply
Who Me Too'd this topic
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.
OSZAR »