LEFTOVR_SAS_600.1GB 6.0 Degraded_The disk may contain invalid metadata. Disk 1.8 and 1.10

[Zesmo2020]

Hello Team,

After site cut over, i got the below error : 

Note : It's an HP MSA 2000 G3

Should remove one disk and wait for rebuild ? or should i run "trust" command ?

Awaiting for your feedback

[Moderator edit: Confidential info erased]

[ArunKKR]

Hi,

You could try a graceful power cycle first to check whether the leftover disks join the vdisk.

Shutdown the storage controllers using the below command:

shutdown both

Allow 5-7 minutes for controllers to shut down and OK to remove LED to light up.

Remove the power to controller enclosure and reconnect it after 2-3 minutes.

Allow 7-10 minutes for controllers to initialize and then verify vdisk status.

Quarantine vdisk troubleshooting usually requires a support case and log analysis to identify the next plan of action if power cycle fails to bring the vdisk online.

I do understand that the P2000 G3 array is an end of support life product.

However, you could try contacting HPE support team in your region to check for any options.

Please note there is a good chance that the data might be inaccessible even after troubleshooting in the current scenario.

[ArunKKR]

Hello @Zesmo2020 , 
 
Let us know if you were able to resolve the issue.
 
If you have no further query and you are satisfied with the answer then kindly mark the topic as Solved so that it is helpful for all community members.

[Zesmo2020]

Hello Dear,

Still looking for solution.

[ArunKKR]

Hi @Zesmo2020,

Have you tried a graceful power cycle as suggested earlier?

[Zesmo2020]

Hello @ArunKKR ,

Yes, but nothing happened.

Now, the vdisk become OFFLINE